UTS™ - 超声波油箱开关

专为恶劣环境中的坦克和管道安装UTS™提供正确的数据恒液位控制，包括顶部和底部的水平以及监控水泵的指示。 保护泵和防止泄漏物得到具有高的效率水平。 UTS™可以操作并提供精确的测量，在任何液体中，在极端的温度和在任何形状的罐。

工作原理UTS™是基于突破性的专利声波技术，提供优异的成绩，在极端的工作温度范围从-200°C至+450°C。测量的准确度，确保无论形状的槽，不同的液体或液体的温度。

UTS™安装在油箱外/管罐/管道内只用一根金属棒。 创建的压电电声换能器的声波在金属棒确保传输信号。当容器中的液体在杆到达探头，发射的声波被隔挡。 这种变化是由压电电声换能器拾起的一个信号被发送到相应的报警。 仅具有金属棒在油箱内，没有机械的或活动的部分，是指不需要维护。

UTS™可以很容易地安装在垂直，水平或倾斜位置，并在很宽范围的介质，例如水，油，石油，石油化工，酸，废水，以及许多其他的操作测试。 UTS™制造的高档不锈钢，也可用于与食品贮藏罐。

UTS™可以安装在室内和室外，包括爆炸性的环境和恶劣的北极条件。

通用液位开关UTS™的特点是高抗粘性的产品，在动态负荷下的可靠性和振动，由于钢筋棒。

API UTS™特点：

• 任何类型的液体
• 油箱内的不锈钢棒（电子和外部连接）
• 全焊接结构
• 没有移动部件
• 扩展温度范围
• 无需维护
• 自动自检
• 无需校准
• 防爆
• 预调报警点
• 没有泡沫的敏感性
• 超过300个可能的变化 

下载UTS™产品宣传册： 
UTS™超声波槽开关为工业应用



 

Universal Level Switch UTS™ has extended operating temperature range from –200°C to +450°C and is designed for level detection in cargo holds, wells & service tanks in sea and river ships, oil tankers, chemical tankers, gas carriers, offshore drilling platforms.
Ultrasonic Tank Switch UTS™ is made of stainless steel and is used for level detection of liquids in vessel tanks, storage tanks, bilge water tanks, cofferdams as well as for control of water ingress to vessel’s compartments.
The operating principle of UTS™ is based on a breakthrough patented acoustic wave technology, providing outstanding results in extreme operating temperatures. Accuracy of measurement is ensured regardless of shape of tank, type of liquid or liquid temperature
UTS™ is installed outside the tank/pipe with only a metal rod inside the tank/pipe. Acoustic waves in the metal rod created by piezo-electric transducer ensure transmission of signals. When liquid in the tank reaches the probe on the rod, the emission of sound
waves is muffled. This change is picked up by the piezoelectric transducer and a signal is transmitted to the corresponding alarm. Having only the metal rod inside the tank and no mechanical or moving parts means no maintenance is required.
UTS™ can be easily installed in vertical, horizontal or any inclined position and is tested for operation in a wide range of media, such as water, oil, petroleum, petrochemicals, acids, wastewater as well as many others. Made of high-grade stainless steel, UTS™ can also be used in tanks and reservoirs with food products.
UTS™ can be installed indoors as well as outdoors, including explosive environments and harsh arctic conditions.
UTS™ is characterized by high resistance to sticky products, high robustness and shock resistance and increased reliability under dynamic load and vibrations due to reinforced rod and electronic unit of new generation. UTS™ is also supplied in a special “Arctic”
version, for applications in harsh environments with ambient temperature of down to –60°C without heating the device.
API UTS™ Features:
 

• Any type of liquid
• Only steel rod inside the tank (electronics and connections outside)
• Fully welded construction
• No moving parts
• Extended temperature range
• No maintenance required
• Automatic self test
• No calibration needed
• Explosion proof
• Pre-adjustable alarm points
• No sensitivity to foam
• More than 300 possible variations

 
See main advantages of UTS™